Filter-holders
Filter Holder

The two filter holders have been created to avoid mechanical vignetting when using new wide angle lenses(see illustrations). The filter holders have a four clip support system that keep the filter very steady. Click on to the lens via adapter rings. The clip device allows the ND filter to rotate and slide into the desired position. The filter holder is easily and rapidly transferred from one lens to another.

 



Code 3200 Silvestri wide angle filter holders for gelatins and 75x75 mm acrylics.
Code 3300 Silvestri wide angle filter holders for gelatins and 100x100 mm acrylics

 

Professional Filter holders for wide-angle lenses
For 75x75, cod 3200, and 100x100 mm formats, cod 3300. The filter holders are attached to the lens by means of screw-on adapter rings. The filter is held in place on a perfect plane.
Format 75x75 Cod.3200
Format 100x100 Cod.3300
Lens-hood Compendium and Professional
Filter holders.

To the left model WA with 2 slots for resin or polyester filters 100x100 code 3305, the adapter rings are threaded or with three blocking screws. Below the wide-angle filter holder; cod 3300, which uses the same adapter rings sizes from 67mm to 95mm
Professional Filter holders Compendium
75x75mm code3205, can hold filters in resin, gelatin or polyester, mounted on self-adhesive cardboard frames. The adapter rings are mounted easily and are available in sizes 40.5 to 67mm. The wide-angle filter; shown aside, uses the same adapter rings (photo left)
Self-adhesive cardboard frames,
for polyester or gelatin filters, are available in
formats:
cod 3204 - 75x75mm,
cod 3206 - 85x85mm,
cod 3202 - 100x100mm
WA Professional Lens-hood &
Filter Hoder Compendium Mounted in 2,8/28mm W/A Digitar in Bicam Camera
Adapter rings
Adapter rings attach code 3200 and 3300 filter holders to different lenses.
ND Filters
ND filters ND or graduated filters are needed to compensate for the fall of light at the frame edges, inevitable with last-generation super wide angle lenses. Absorption from 1,5 to 2 stop. (For description and codes and see list.)

Caps
Code 2530 back protection cap for Silvestri bayonet standard lenses.
Code 2531 Schneider 67mm diam. Cap for Super Angolon.
Code 2532 106x106 protection cap for S4 lens panels.